Athena Bloom is a two-part liquid mixture that is easy to use, cost-effective, and intended for fruit- and flower-producing plants during their flowering stage of development. In any combination of water type and growing medium, we combine top-tier macronutrients and chelated micronutrients to ensure better uptake throughout a wider pH range.
To enhance the early commencement of bud production, expand flowering sites, and encourage high-quality yields, our 2-part blended mix should be applied in equal doses throughout the flowering stage.
All irrigation and dosing methods, including fine dripper heads, are compatible with the formulas since they are devoid of silt. In some circumstances, trace levels of microparticles are occasionally visible, but they have no impact on the compatibility of the system or the mineral balance.
Best Practices
| Recipe |
Always use equal parts Athena Bloom A & B. |
| Mixing |
Do not combine fertilizers in concentrate form, always dilute in water. |
| Measuring |
Carefully measure using clean instruments. Never put anything into the bottle. |
| Water |
Use a higher dose in reverse osmosis (RO) water. For well, tap or city water, reduce CaMg to account for existing water content. |
| pH Range |
5.6 - 6.2 |
| pH Adjustment |
Use Athena Balance to buffer water or adjust to desired pH after mixing. |
| Storage |
Store closed in original packaging at a temperature between 7° C and 29° C. |
| Diagnostics |
Extreme heat or cold can affect solubility. If you see crystallization or sediment, shake well to redissolve. If the problem continues, contact Athena Support for a replacement. |
Product Features
Irrigation - Compatible with all dosing and irrigation systems.
Solubility - 100% soluble, no residue, will not clog emitters.
Stability - Once mixed, pH will remain stable in solution.
Filtration - Two-stage filter with 1 micron mesh to remove all particulates and contaminants.
Application Instructions
| Rate |
Choose a feed schedule based on growing media, strain, and environment. |
| Frequency |
Apply with every feeding. |
| Timing |
Best results are seen with more frequent lower volume feedings |
| 1 mL/3.785L = |
0.17 (EC) • 85 (PPM 500) • 120 (PPM 700)
|
Guaranteed Analysis
|
Bloom A |
Bloom B |
| Total Nitrogen (N) |
4% |
0.7% |
| Nitrate Nitrogen |
3.8% |
0.5% |
| Ammoniacal Nitrogen |
0.2% |
0.2% |
| Available Phosphate (P2 O5) |
NA |
6% |
| Soluble Potash (K2 O) |
5% |
5% |
| Calcium (Ca) |
3.2% |
NA |
| Magnesium (Mg) |
0.17% |
0.94% |
| Boron (B) |
0.01% |
NA |
| Iron (Fe) |
0.06% |
NA |
| Manganese (Mn) |
0.013% |
NA |
| Molybdenum (Mo) |
0.0007% |
NA |
| Zinc (Zn) |
0.0045% |
NA |
| Sulfur (S) |
NA |
1.3% |
| Copper (Cu) |
NA |
0.005% |
DERIVED FROM
BLOOM A: Calcium Ammonium Nitrate, Potassium Nitrate,Iron EDTA, Iron EDDHA, Zinc EDTA, Manganese EDTA, Sodium Molybdate, Sodium Borate, Magnesium Nitrate
BLOOM B: Monopotassium Phosphate, Potassium Nitrate, Copper EDTA, Magnesium Sulfate, Monoammonium Phosphate
