XM Mini should be installed on walls or from the ceiling about 1 – 2 ft. above
the highest canopy height. Stay clear of lights, etc. that will interfere with the distribution of the
sanitization. The units plug into standard 110 outlets.
3. The DXM Mini uses the air flow in the room to help distribute the sanitization. Place the unit
near air supply vents, and away from air exhaust vents. The goal is to provide sanitization to the
top of the crop canopy and keep the sanitization in the room as long as possible.
4. The DXM units should be installed with the Air Exhaust Port facing up.
5. Do Not place the DXM Mini unit where it will be exposed to water.
6. Do Not place the DXM Mini directly in front of fans. It is best to keep the unit about 3 feet from
the nearest fan, which will allow the fan to help gently distribute the sanitization.
**IMPORTANT INFORMATION**
1. COVERAGE: DXM Mini units are designed to cover up to 250 sq. ft. based on average ceiling
height of about 10 - 12 ft.
** Units installed in smaller rooms less than 250 sq. ft. may need to be placed on
a timer to cycle the unit on & off for periods of time if the sanitization seems too
strong for room inhabitants. Please contact Innovative Solutions with any questions
on determining the cycle times.
7. There is a small amount of light that is visible inside the DXM Mini Air Outlet port. This light
has been tested and proven to not be in the light spectrum that will have any impact on plant
growth cycles.
8. Refer to the User Manual for complete installation instructions
Consistent Maintenance Is Critical To Ensure Optimal Performance
1. Unplug the DXM Mini unit before removing the unit cover for maintenance and service.
QUARTERLY SERVICE
2. The Air Filters should be replaced every 3-4 months or as needed to keep the inside of
the DXM Mini unit clean. This varies based on the environment; in clean grow rooms
typically about every quarter. Simply remove the unit cover to easily slide out the
filters for replacement.
ANNUAL SERVICE CRITICAL MAINTENANCE
3. The air purification ARC® cell should be replaced every 12 months for optimum
performance due to the fact the UV light degrades over time and the ARC cell gets
coated with foreign matter. The ARC cell is easily replaced by following the instructions
in the user manual.
** The ARC® cell is a critical component that creates the air sanitization that destroys
mold, mildew and bacteria. Failure to replace the ARC cell annually will cause the
unit to become ineffective.